Exactly how to Troubleshoot and Fix an Electric Water Heater
Exactly how to Troubleshoot and Fix an Electric Water Heater
Blog Article
We have stumbled upon this great article pertaining to What Would Cause My Electric Water Heater to Stop Working? down the page on the web and accepted it made sense to share it with you here.
Several modern homes take advantage of an electrical water heater for their heating unit, due to its ease and also simplicity of use. However, similar to any other electric home appliances, problems might develop with its usage, unexpectedly. It can be actually discouraging to wake up to a cold shower as opposed to a hot one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case might be, hot water heater problems can be fairly stressful. Thankfully, we have actually made a listing of possible remedies to your hot water heater issues. There are a variety of aspects that could create a number of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety and security. Whatever the issue is, getting it fixed must not position way too much of a problem if you adhere to these steps:
Call A Professional:
If after changing all faulty components and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a professional plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, a professional plumber would certainly help resolve the trouble.
Check Your Power Supply:
As standard as this may seem, it is really necessary. Without appropriate power, your hot water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, simply transform it on and off again. Replace any kind of broken or worn-out fuse. Check the appliance with power after these modifications to see if it's currently functioning.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to examine the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature reset over the thermostat. This need to help heat the water. Turn the breaker back on and also examine if the problem has been fixed.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still working. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards examine whether the hot water is back on.
Conclusion
Water heater problems are not always major. A number of them are because of minor problems like a blown fuse or damaged burner. Replacing the malfunctioning components must work. Nevertheless, if you are still not able to fix the issue, give a call to your nearby plumber to find to get it taken care of.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
I recently found that write up on No Hot Water — Water Heater Repair while doing a lookup on the web. In case you enjoyed our page if you please remember to pass it around. Thank you for your time invested reading it.
Book My Estimate
Report this page